Mounting a scope requires a lot of experience, if you do not want the same rifle scope and damage. First of all, the points of attack identified so that the eye is about 8 inches from the shooter's eye. In a weapon not only football, but also the weapon system must be able to view, is the perfect size and the type of scene and target shooter. It is not the shooter, the weapon should be fine, but vice versa. For example, if the shooterthe weapon used to shoot horizontally, you must consider that the head is close to the telescope more than in other positions.
After identifying the distance, the connection points gun must be set accordingly. If the connection points are two, it is important that the telescope is able, in which, without any tension or torsion, but always ensuring the complete lack of space. The ability of the group can be assessed, although the scope is mounted, requires at leastSetting on the viewfinder.
Typically, the Assembly has the bull's-eye sighting through the barrel or, if available, with front and rear sights, and then focus the scope on the same point. Of course, at this stage we can consider the deviation from the path line of sight, the so-called zero-spacing. Those who do not have enough space around the target at a hundred yards to put the gun to reset the short or the DOA Tasco collimators, which are inserted into the useTo achieve a complete simulation of a plug with a target virtual zero.
The aim is usually so that its optical axis is mounted inches above the barrel axis 4.5. This height is not critical because the longer the scope is installed higher, extending the right distance from zero. However, if the weapon is used in the animal rights movement, it is recommended to be in a position lower than an instinctive attitude encouraged to install a low target to shoot better. Without this, aExpert marksman's weapon with three or four test shots of the melody by turning the knobs lattice. Usually, clicking on the button corresponding to a shift of an inch on the target at 100 meters.
It is the network of thin wires in the telescope or a glass plate on which is engraved together. The grid of thin wires is well in good light conditions, but is unsuitable for the twilight, when you can see, they improved lattice bars.
0 comments:
Post a Comment